SFR-1 mod. 101-SA | en.zavodsa.ru

Appearance may vary slightly from photo.

The product is out of stock

Model code :

SFR-1 mod. 101-SA

Snowplow milling and rotor SFR-1 mod. 101-SA

Print version Download

The rotor snow blower is the next step in the development of screw rotor snow blowers. It differs not only by a more powerful motor but also by a revised drive circuit and the working body itself allowing cleaning at the lowest cost as the best foreign analogues.

Табы

Specifications

Type of execution	Single engine
Snow Blower Type	Rotor milling
Chassis	URAL - 4320
Wheel formula	6х6
Technical productivity, t / h
- at a bottom height of 0.6-0.8 m. and snow density 0.5t / m3	2500
- when the height of the snow roll is up to 0.5 m, not less	3000
Number of rotors	1
Rotor diameter, mm	1100
Number of screws	3
Cutter Diameter, mm	1060
Screw rotation speed, rpm	295
The maximum width of the strip being cleaned in one pass, mm.	2900
The maximum thickness of the snow cleared in one pass, mm.	1500
The maximum range of rejection of the bulk of the snow, m	40-50
Drive of working body and running gear	Mechanical from a two-speed KOM with a built-in creeper under the hood of the car instead of a regular engine
Management of the working body	Hydraulic
Make of the engine for the drive of the working body and chassis	YaMZ-7511 Diesel, turbocharged, direct fuel injection, liquid cooled. Power - 294 kW (400 HP) Location and number of engine cylinders - V-8
Preheater:
- model	Teplostar 14TS
- accommodation	In the back of the cab
Electrical equipment:
- Rated voltage, V	24
- Accumulator battery	2 pcs. capacity 190 A * h each
Transmission	Mechanical, five-speed, three-way
Undercarriage clutch	Single-disk with PGO
Transfer case	Mechanical, two-stage with a locking center differential
Driving bridges	Feed-through type with the upper arrangement of the main gear, with BMKD
Cardan drive	Open type with needle bearing joints
Suspension
- front	On two semi-elliptic springs with hydraulic telescopic shock absorbers
- back	Boom balancer
Cabin	All-metal, triple, equipped with ventilation system
Steering	With double-acting hydraulic booster
Service brake system	With pneumatic-hydraulic dual-circuit drive
Speed, km / h
- with creeper on	0,3-4,04
- with the creeper off	3,5-48
Fuel consumption in operating mode, l / h	no more than 50
Fuel consumption per 100 km of transport mileage, l	no more than 45
Cruising range in transport mode, km	1100
Overall dimensions (long * width * height) mm.	10142х2900х3076
Curb Snowblower Weight	15410