| Base chassis |
URAL-4320, off-road, 6x6 wheel arrangement. |
| Thermal unit |
VK-1A jet engine with a special trailed nozzle. |
| Productivity (when removing ice formations up to 5 mm thick and ambient temperature up to -5 Ċ), m2 / h, not less |
10 000 |
| Fuel capacity, l |
6500
|
| The number of fuel tanks, pcs. |
1 |
| The transported stock of fuel, l |
5000
|
| Fuel consumption VK-1A, l / h |
1000-1200 |
| The position of the axis of the jet engine in a vertical plane at startup (down), degrees. |
0°-4,5° |
| The position of the axis of the jet engine in a vertical plane with the working position (down), degrees. |
7°-20° |
| The angle of rotation of the jet engine in the horizontal plane (left and right), degrees. |
30±2° |
| Minimum ground clearance in transport position, mm |
300 |
| Jet engine turning time: - in the horizontal plane (30 ° - left-right), sec. |
20 |
| Jet engine turning time:: - in a vertical plane (down-up - start and work position), sec |
12 |
| Time of transfer of the working body from the transport position to the working one or from the working position to the transport one, min |
30 |
| Maximum pressure in the hydraulic system, MPa (kgf / cm2) |
17,5 (175) |
| Rated voltage in the electrical system, V |
24 |
| Working speeds of movement of the car, km / h |
0,3-3,0 |
| Maximum transport speed of a car with a portable fuel reserve, km / h |
35 |
| Cruising range with transport mileage, km |
700 |
| Overall dimensions in working position length, mm |
12800 |
| Overall dimensions in working position width, mm |
2600 |
| Overall dimensions in working position height, mm |
3250±60 |
| The mass of the working body with a trolley, kg |
2500 |
| The mass of the equipped car with fuel for a jet engine (gross weight) in the transport position, kg |
18800 |
| Load distribution from the equipped machine with fuel for a jet engine in the transport position: through the tires of the front axle of the chassis, N (kgf) |
40000 (4080) |
| Load distribution from the equipped machine with fuel for a jet engine in the transport position: through the tires of the bogie of the chassis bridges, N (kgf) |
106000 (10820) |
| The load distribution from the equipped machine with fuel for a jet engine in the transport position: through the tires of the trolley of the working body, N (kgf) |
26500 (2500) |
| The smallest turning radius along the axis of the track of the front outer wheel of the machine in the transport position (relative to the center of rotation of the wheel), m |
10,8 |
| Turn radius on the outermost edge of the nozzle in the working position: nozzle is rotated (left-right), m |
14,5 |
| Turn radius on the outermost edge of the nozzle in the working position: nozzle along the machine axis, m |
15 |
| Resource before the first overhaul not less than, h |
2500 |
| Service life before major repairs, years |
not less than 5 |
| Service life before decommissioning, years |
not less than 12 |
| MTBF hours |
not less than 300 |
